|
HMKR
S34 SILICONE IMPREGNATOR |
|
|
|
APPLICATION:
A silicone base impregnator of highest stability against dirt, water,
oil, alkali, and frost damage. For interior and exterior use on all mineral and ceramic
surfaces and finishes. Surface treated with HMKR S34 is 98% vapor permeable. UV
resistant, and leaves a natural appearance. |
|
|
DIRECTIONS:
Apply to chemically clean and dry surface with a natural bristle
brush or HMKR Z170-171 Sealing Brushes. One or two thin and even applications,
wet on wet, are usually sufficient. Allow 5-10 minutes between each application for
penetration. Thoroughly remove excess HMKR S34 15-30 minutes after application
with white terry cloth; add pure solvent or R99 Stripper/Thinner if necessary to
facilitate the excess removal. |
|
|
COVERAGE:
100-150 sqft/qt. on polished surface.
WARNING: Contains Turpentine Substitute. Flammable. Keep away from heat,
sparks, and flame. Harmful or fatal if swallowed or inhaled.. Use with adequate
ventilation. Avoid eye/skin contact, breathing vapor or mist. If exposed, wash/flush with
water. Get medical attention. Keep container closed and away from children. See Material
Safety Data Sheet.
TESTING: Perform testing on installed surface to determine several
factors: number of coats necessary to achieve proper protection; visual appearance after
application: protection against water and dirt infiltration. |
|
|
