c l e a n i n g:
HMKR R55 INTENSIVE CLEANER/GROUT FILM REMOVER -acid free-
APPLICATION:
A superior pH 8.5 neutral cleaner for use on all new and existing interior and exterior natural and cast stone, agglomerate, and ceramic tile, regardless of surface finish. Especially formulated to remove cement/grout film residue, light construction dirt, soil, and light wax coast from polished and honed surfaces, since R55 will not etch finishes. Use HMKR R54 for heavy wax removal.
DIRECTIONS:
For initial cleaning, apply full strength; for periodic thorough cleaning use diluted 1:10-1:15 with water. Let stand for 10-20 minutes, but do not let dry cure. Scrub vigorously with a non-abrasive white/tan polyester pad. Re-wet area with same solution as needed. Let stand again for a few minutes, then flood rinse with clean water and wet vac. A second application may be required for stubborn spots. Double or triple rinsing may be necessary, especially if a sealer/impregnator or a polish is to be applied. Note: Use HMKR Z102 Defoamer in wet vacs and scrubber tanks to prevent foaming.
COVERAGE: 100-150 sqft/qt. at full strength; 1800 sqft at 1-15 dilution for periodic
thorough cleaning.
CAUTION: Chemical product. Keep away from children.
TESTING: Always test procedure first in an inconspicuous area to determine dilution
rate, acting time and performance.

Home | companyperformancesreferencessmall galerie
1pixel.gif (43 Byte)

material we work with  | technical equipmentcontact