|
|
|
HMKR
R54 STRIPPER/STAIN REMOVER -acid free- |
|
APPLICATION:
A professional liquid stripper/stain remover for all mineral and ceramic surfaces and
finishes for the interior and exterior. HMKR R54 strips most heavy wax coats,
sealers, varnishes, and other protective build-ups. Prepares the surface for application
of new finishes. Ideal for removing paint, oil, grease, tar, and other stains
(can be used in a poultice). May not completely remove deeply seated stains and some
urethane finishes. |
|
|
DIRECTIONS:
Apply generously onto dry surface. Allow to act for 10-15 minutes, but not let dry. Use
only non-abrasive and solvent resistant pads/brushes. Rub by hand or use floor machine and
scrub vigorously. HMKR R54 should then be picked up with a mop, sponge, or
wet-vac. Rinse floor with clean water, and wash with HMKR R55 before final
water rinse. Repeat procedure until coating/stain is completely removed. |
|
|
COVERAGE:
50-80 sqft/qt.
WARNING: Contains Naphtha. Combustible. Keep away from heat and flame.
Harmful
or fatal if swallowed or inhaled.. Use with adequate ventilation. Avoid eye/skin contact,
breathing vapor or mist. If exposed, wash/flush with water. Get medical attention. Keep
container closed and away from children. See Material Safety Data Sheet.
TESTING: Always test procedure first in an inconspicuous area to
determine dilution rate, acting time, performance, and visual appearance. |
|
|
